FOLOCOVER SP is a profile designed to join two adjacent existing floors at the same height. It can cover imperfections in cutting or slight variations of height to be found on a tiled floor joining to a wooden one for example. Thanks to its shape, available in 3 different widths, materials and wooden colours, this profile acts also as a dilatation joint.

Decorative listello in Stainless Steel AISI 304 to make nice decorative inlays with reduced costs and an easy application.  Used as separation element between floors, to create drawings and decorative strips, it meets building and interior design new trend , which focuses the more and more on aluminium and stainless steel.

Separation profile for matching floors. It allows grinding. New version in Natural aluminium.
5 mm visible surface. It is ideal for marble or wood flooring combinations. The arrow shaped vertical flange of this profile ensures a solid mechanical bond with the adhesive.

Profile for joining existing floor. The rounded shape of this strip profile grants compensation of a maximum height difference of 5 mm. To apply FOLOSTRIP means also to cover up the slight imperfections which may occur during the laying job. New clad version in 6 wood colours, width 30 mm. Drilled or self-adhesive version.

Terminal edge profile for wooden and laminate floors. This terminal edge perimeter profile trim is especially designed for floating wooden floors to ideally finish to wall edge and adjacent

floors. It also serves as an expansion joint and is an alternative to skirting. New clad version in 6 wood colours available for height 9 mm. Suitable for the most common floor thickness between 7,5 and 9 mm.

MULTICOVER represents two further possibilities of alternative fixing for the junction and edging profiles series CLG and CLF, with wood clad finish. These profiles are actually available also in the drilled version for fixing with screws and dowels, or self adhesive,

provided with a special high quality elastomer adhesive for easier application.

Formable junction profile in synthetic resin. Composed of a perforated base plus finishing profiles in grey and black, in two versions: for floors at the same level or to compensate height differences. Ideal for commercial applications or renovation jobs, they allow to make easily on site nice decorative effects and cover the junctions between different floors.

New version of the stair nosing for ceramic tiles FS in aluminium with synthetic anti-slip replaceable infill available in four different colours.

End-caps available for the various height also for the “clip-system” version.

Decorative stair nosing profile in stainless steel AISI 304. The vertical edge trim helps
cover cutting imperfections as well to blend into other possible future covering material of the stairs. It ensures very good tolerance to most of diluted

chemicals. Suitable also to contour kitchen tops and shower cubicles.

Silver anodised aluminium stair nosing with 50 mm wide anti-slip strip. New version 65 mm wide and 52 mm height. To meet the most recent safety standards in terms of visibility and anti-slip surface, where the minimum provided step edge surface is 55 mm.

step edge stair nosing aluminium profile easy to apply on existing coverings where corner edges need to be refurbished. Available self-adhesive or drilled for fixing with screws+dowels. New wood clad versions in6 wood colours H 20 mm

The FOLOSTAIR product range is conceived to face ceramic tile adjustment problems of stairs , by featuring valid and lasting technical solutions. Modular stair edging system with optional rotating riser cover, anti-slip with improved step edge visibility. Different versions available to be applied during or after the laying.

FOLOLIST listello enables the layer to recall the colour combination desired on the tile covering. FOLOLIST is available in many colours and materials in particular the stainless steel version offers a decorative effect in combination with durability and design application.

technical expansion joint with interchangeable insert .New version height 20 mm available both for the natural brass and for the aluminium ones.

technical expansion joint with interchangeable insert .New version width 20 mm available both for the natural brass and for the aluminium ones in all heights. Conceived for bigger gaps, it compensates horizontal movement of +/- 3 mm.

New version of the movement joint suitable for grinding. Its vulcanised insert in EPDM grants an excellent elastic capacity over time as well as good recovering performances in case of deformation. Excellent cohesion of the whole thanks to the special production technology.

Perimeter version of the dilatation joint Coflex CA. In synthetic resin coextruded, cement grey. It matches well with all kind of floor, suitable for applications  around the perimeter of a room or next to windows, door frames and thresholds.
Thanks to its reduced visible surface it looks as if part of the grouting job. It is extremely elastic and compressible.

structural expansion joints with a pivotal movement between the metal flanges and a synthetic rubber insert. New version H 70 mm.
 Designed to bear structural movements of large sized buildings or compounds of buildings. They are installed over the spaces existing between two semi-detached parts of a building of smaller entity or between different beam bays.

Aluminium body structural expansion joints and a synthetic rubber insert.
New version with visible part in stainless steel for improved aesthetics, durability and increased resistance to most diluted chemical products.
New versions inH 50 mm also for Jointec GM with visible part in brass or aluminium

Sliding structural expansion joint entirely realised in aluminium, total width 105 mm-gap 86 mm.
Designed to bear structural movements of large sized buildings or compounds of buildings. They are installed over the spaces existing between two semidetached parts of a building of smaller entity or between different
beam bays.

High performance technical expansion joint cover .
Aluminium structure with a highly elastic double synthetic rubber Insert, width 37 mm . Designed to bear structural movements of large sized buildings or compounds of buildings. To be installed on pre-existing surfaces, also vertically, over the spaces existing between two semi-detached parts of a building of smaller entity or between different beam bays.

Joint filler for saw cuts in concrete and quartz-paste industrial floors, smoothed with vibrating float.
Thanks to the exclusive production system with an inner glass fibre thread, this joint does not elongate during installation and limits the shrinkage.

The particular lightened shape in the upper part improves the profile versatility, which can suit cuts widths from 3,5 to 5,5 mm

Supports for screed reinforcing mesh for installation during screeding.
For correct installation of screed, the reinforcing mesh should be fixed in the middle of the screed using the supports to hold the mesh in position.
The supports are available in a range of heights to suit most screed thickness, and are suitable for use with different types of wire mesh (diameters from 1,5 mm - 15 mm) due to the design of the top supports.

Fire-stop cords for expansion joints. They grant efficient protection against fire and gases for a few hours. Cylindrical flexible and compressible filler made of mineral fibres over bound with glass fibre yarn or fire stop joints. Easy to install, available in various diameters. Usable for horizontal and vertical joints, along dividing panels and standing walls, matting, pipe works and ducts.

Waterproof band in a flexible material suitable to seal in an elastic way floor-to-wall corners of bathrooms, showers, kitchens, balconies, etc. also in correspondence of expansion joints.
Made of thermoplastic waterproof elastomer Foloband is provided with external and internal pre-cut corner junctions.

Polypropylene supports for cement laid floating tiles and floor coverings. Ideal for large balconies, terraces, verandas walkways and roof gardens.
They aid installation by allowing the cement to be accurately placed beneath the tiles while fixing the tiles at the edges and ensuring an adequate amount of drainage beneath the tiles.

Aluminium body structural expansion joints with a pivotal movement between the metal flanges and a synthetic rubber insert. They can connect the interspaces between buildings adjusting themselves up-wards, downwards and transversally, according to the shrinkage-settlement movements of the building, either cyclic or permanent.

Modular high width structural joints as provided by standards for seismic risk areas. The remarkable width to cover reduces their load resistance, they are nevertheless suitable for pedestrian and small trolleys passage, like stretchers or supermarket trolleys. They can cover interspaces with widths of 100 mm.

New skirting board version in stainless steel, polished or brushed-mat finish, to fix with adhesive or screws.
Conceived to meet the growing demand for stainless steel profiles. It is provided with a contoured projecting end which allows the necessary dilatation space to the floor.
 Ideal particularly for hospital and industrial areas.

Synthetic resin wall protection strip, through-coloured to hide the effects of
wear and damage. Resistant to impact damage and self extinguishing. The smooth surface makes it easy to clean and more hygienic than traditional skirtings. Available in 16 colours and a range of dual-coloured options, the WP wall protection strip can be co-ordinated with the other profiles in the wall protection range - corner protectors (WA) and skirting (WB).

Synthetic resin skirting, through coloured to hide the effects of wear and damage Resistant to impact damage and self extinguishing.
The smooth surface makes it easy to clean and more hygienic than traditional skirtings.
Available in 16 colours and a range of dual-coloured options,  The WB skirting profile can be coordinated with the other profiles in the wall protection range – corner protectors (WA) and bumper guards (WP).